top of page
Search
louisseiter3661jh

Usb Sc09 Fx Driver Download: The Best Programming Cable for Mitsubishi FX2N/FX1N/FX0/FX0N/FX0S/FX1S/



The USB-SC09-FX cable is a programming and communication cable that can be used to connect a Mitsubishi PLC (programmable logic controller) from the FX0N, FX1N, FX2N, FX0S, FX1S, FX3U, or FX3G series to a computer for programming and communication purposes. It uses a USB connection and requires a device driver to be installed on the computer to function properly. This driver is known as the USB SC09-FX driver. Once installed, the driver allows the computer to communicate with the PLC using the Mitsubishi GX Works2 software.


USB device drivers should be installed before using programming cable, which are available on the CD-ROM sold together with the cable. And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here.




Usb Sc09 Fx Driver Download




USB-SC09-FX is a programming cable which provides serial connection and RS422 signal conversion through the USB interface. Under the control of the driver running in the computer, the USB interface of the computer is simulated as a traditional serial port (commonly known as COM port), so that the existing programming software, communication software and monitoring software are used. The working power source of this cable is from USB port. It is no longer powered by the programmable port of PLC. The two-color light emitting diode on the conversion box indicates the receiving and receiving status of the data.


USB-SC09-FX programming cable needs to install USB device drivers to use. When the driver is installed, the COM port corresponding to the USB-SC09-FX programming cable will appear in the device manager of Windows. It is only necessary to select the COM port in the programming software or other application software. The other communication parameters are set by default.


Mitsubishi usb sc09 fx use notes:1. If the USB programming cable plugged into the computer is not detected when the computer is turned on (the COM port corresponding to the cable does not appear in the Windows device manager) or other abnormal conditions occur, please re-plug the USB plug once.2, USB to UART is a plug-and-play USB device, it can not be disconnected during data transmission (disconnect means to pull out the USB cable from the USB socket), that is, must be closed in the application After the serial port, you can unplug the cable from the USB socket.3. Sometimes the USB communication error occurs when the Windows system is faulty or the USB cable is plugged in during communication. At this time, it may be necessary to restart the computer and the PLC.4. Generally speaking, it is best to insert the USB cable into the USB socket first. After the computer detects the COM port, insert the other end of the programming cable into the PLC communication port. Because some PLCs work in the master station mode, the communication port is always in the communication port. Sending data to me continuously, such as plugging the cable into the port of the PLC first will reduce the speed at which the computer correctly recognizes the COM port.


The Mitsubishi Plc Cable does not require an external power supply because the power grabs directly from the USB port, in addition to which it converts the USB protocol to the RS422 protocol, so when connecting it (once its respective driver) generates a COM port, which must be taken into account when wanting to establish communication with our PLC. 2ff7e9595c


1 view0 comments

Recent Posts

See All

Baixar música Phonk

Phonk Download Music: Como aproveitar o subgênero do hip hop underground Se você é fã de hip hop, deve ter ouvido falar de phonk, um...

Comments


bottom of page